Fire Extinguisher – The Do’s and Don’ts in Handling and Maintenance

We all have different ways to fight fire. Sometimes we prefer prevention rather than fighting it. Even though there are many ways to prevent this incidence from happening, fire accidents still occur. People still get hurt, loose their homes or even lives in the process. That is why people buy devices to ensure that small incidences of fire will not turn out big to the point of being destructive. Some people do survive with the aid of these devices

The presence of a fire-protecting device is important in making a place fire safety. Despite the fact that is mandated by building codes and standards to have them around, people still get them for the reason of fire safety. Even people owning their homes, buy them for the reason that even at home, fire can be a big risk to use. Your gas tanks or pipelines, grillers, burners, heaters and other electrical devices are all fire hazards. Although, these devices may not be used at all times, having them can be a plus in case of fire emergencies.

There are many types of devices that you can buy in the market and they also have different indications. Actually, these fire-protecting devices are commonly referred to as fire extinguishers. With these devices, there are certain things to keep in mind when using them. Take note of the dos and donts below:

DOs

1. read the instruction manual to understand the use of the device.

2. check the rating or classification of the device to know the kinds of fire it is applicable.

3. follow the pneumonic PASS in extinguishing the flames

4. Maintain a safe distance when extinguishing the flames.

5. put signs and indicators on the location of the device. Make sure that they can be seen easily. They should also be accessible.

6. Hang them on walls or use protective cabinets to keep them.

7. undergo proper training for proper handling of a fire extinguisher as set by the OSHA or Occupational Health and Safety Administration. Follow also strict rules set by the NFPA or standards and codes set by them for these devices.

8. recharge the equipment after use and follow maintenance schedule.

DONTs

1. use them if you have no idea on how to operate them. You will just put it into waste.

2. use water agents on grease and oil fires or use dry chemical extinguishers to electrical devices or anything with metal because it is corrosive.

3. aim at the flames of the fire.

4. stand too close to the fire or even plan to walk on those extinguished areas.

5. put them on areas where fire is most likely to happen making them unreachable.

6. leave them on corridors or any anything that is highly magnetic.

7. violate the standards because even with their presence you might still be at risk or more prone to the dangers of fire.

8. play with the device or even play with its substances use because of the possibility of injuring you.

Tips in the Proper Care and Maintenance of Taser Guns

Owning a self-defense tool is a common scenario nowadays due to the rising cases of criminality and crimes. Majority of individuals decide to own self-defense devices to protect themselves and their families from harm. However, as responsible owner of these tools, it is your duty to care for them to maintain its proper functioning.

It is not enough that you buy these tools and store them in your bag or in your cabinet anytime you want. Like other gadgets and appliances you have inside your home, you have to observe proper guidelines on how to maintain and to care for these devices, otherwise it will not perform its best when you need it.

Purchasing a taser gun and getting the needed licenses are not the only duties you have as owner. As efficient and responsible owner, you should know how to care for the device properly to maintain its efficacy and functionality. If you do not want the tool to malfunction and harm you instead of the attacker, take time to regularly inspect and do regular maintenance. This article details the proper way to care and to maintain a taser gun.

Below are tips on how to properly care for a stun gun:

1. Be sure to recharge the batteries of your taser gun regularly. Since the indicator is not enough to show the amount of power inside the device, it is best to perform a spark test to find out if the batteries need charging.

2. Be sure to check the expiry date of the taser cartridge, especially if you have not used the tool for a long time. Most often, taser cartridge only lasts for about five years, thus do not use the batteries if it is beyond its expiration date. Remember that the expiration date does not depend on how frequently you use the device, but the expiry date is preprinted on the product label by manufacturers.

3. Bear in mind that taser guns are sensitive tools, thus be sure to take care of it and to handle it with care. Avoid dropping it on the floor because even though taser housing is made of plastic, it can crack and breaks once it fell on the floor on impact.

4. Be sure to place it in dry and moisture-free areas because it cannot function properly when wet. If moisture enters the device, take out the batteries immediately and dry its body for about 24 hours.

5. Avoid repairing the taser yourself, but bring it to an authorized and accredited service center for maintenance and repair. Bear in mind that taser guns are not made of simple circuitry and parts which can be repaired by ordinary individuals like you. If you find something defective and wrong with your tool, have it checked by the nearest service center technician. They are the only ones who are credible and experienced in repairing these devices.

6. Never place the device anywhere and within the reach of children to avoid tinkering and accidents from happening.

By following the suggestions above, you can care for the device effectively.